精密烤箱

型号：DX8394

包装：木箱或木架

保修期：12个月

循环方式：强制水平送风循环

全国服务热线

132-6622-1899

在线咨询

1.所需容量约50L

2.适用于实验室固化工艺

3.温度范围高达220°C（带温度监控器）

4.需要温度控制

5.电源220V50 / 60Hz

6.真空范围：10-2至10-3托（我们需要控制真空度）

7.干燥无油的真空系统

一、适用范围：Application

Environmental Test Chamber Vacuum Drying Oven for Medicine , Electronic

工业干燥箱适用于电子，石油，矿山，医药，机械制造等。鼓风干燥及热处理产品。

二、结构Structure:

1、工业干燥炉采用单片式，保温隔热层采用优质矿棉，外壳，热风循环装置，电控柜右侧钕铁硼.. 干燥箱操作方便，干燥柜配有新的进出口空气，柜内通风管道和热风循环风机，烘干套管；

Industrial drying oven adopts monolithic, thermal insulation layer is made of high quality mineral wool, shell, hot air circulation device, electric control cabinet on the right side of the ndustrial drying oven is convenient for operation, drying cabinet equipped with new air in and out of port, the cabinet ventilation duct and hot air circulation fan, drying the casing.

2、外壳材料：主体骨架采用40×40mm角钢焊接在一起，围护墙材料采用0.8m m厚不锈钢板；风层采用厚1(SPCC)冷轧钢板制作外墙材料为1mm冷轧高碳钢，车身表面涂浅灰色涂料；

Case material: body skeleton adopts 40 x 40 mm Angle steel welded together, enclosure wall material is 0.8 mm thick stainless steel plate; Wind layer is made of thick 1 (SPCC) cold rolling steel plate, the outer wall material is 1 mm cold rolled high carbon steel, body surface coating light gray paint.

3、保温材料：优质矿棉，保温层厚度设计要求确保烘箱在额定工作温度范围内，套管外壁.. 室温温度25°C或以下；>100毫米绝缘层厚度在烤箱底部约80毫米；

Thermal insulation material: high quality mineral wool, the thickness of the insulation layer design requirements to ensure that the oven in the rated operating temperature range, casing outer wall temperature at room temperature + 25 °C or less; > 100 mm insulation layer thickness of insulating layer at the bottom of the oven about 80 mm.

4、门密封条：耐高温石棉绳密封；

Door sealing strip:High temperature resistant asbestos rope seal

5、门为：设计开门与门为手动平开，门为钢结构钢与精度高的合格钢板组装焊接而成；

The door is:Design to open the door and the door is manual flat open, the door is steel structure steel and precision of high qualified steel plate assembly welding and into.

6、门是密封的：使用棒柄和门的手册是软边密封装置，压力可以使门和外壳，确保在过程中保持关闭框的状态。在生产中，消除热气体逸出，改善工作环境，保证箱体温度均匀性，提高节能效果；

The door is sealed:USES the manual of the rod handle and the door is the soft edge sealing device, pressure can make the door and enclosure, make sure remain the state of closed box in the process of production, to eliminate the hot gases to escape, improved working environment, guarantee the box temperature uniformity and enhance energy saving effect.

7、由0.8毫米厚不锈钢板表面钝D13孔制成，用于控制气流，提高炉温度均匀性。

The wind but I:Wind but made of 0.8 mm thick stainless steel plate surface blunt D13 holes, is used to control the air flow, to improve the drying oven temperature uniformity.

标签: 检测设备试验机厂家

分享到：

上一个：高压漏电起痕试验机

下一条：IP5和IP6 800×800mm...